The pressure angle of two gears in a mesh is ? = 22.5°. The number of teeth on the pinion is 25 and the gear ratio is 2. The module is 7 mm and addendum = 1 module. Find the angle of action of these two gears.
View Answer & Explanation
The pressure angle of two gears in a mesh is ? = 25°. The number of teeth on the pinion is 45 and the gear ratio is 2. The module is 6 mm and addendum = 1.1 module. Find the contact ratio of these two gears.
If the maximum addendum radius of the wheel is given as 260 mm and the actual value of the addendum radius is found out to be 255 mm, the interference will occur. True or false?
Two involute gears have a pressure angle of 20°. The gear ratio is given to be 3. The module is 5 mm and the value of addendum is equal to 1 module. Determine the minimum number of teeth on each wheel to avoid interference, if the pinion rotates at 100 rpm.
Find the maximum value of addendum radius of the larger gear if the pressure angle between two teeth is equal to 25°. T = 50 and t = 25. The gears have a module of 8 mm and the addendum is equal to one module.
The number of teeth on a pinion is equal to 20 and the gear ratio is 3. The pressure angle is equal to 15°. If the module is equal to 6 mm, find the path of contact when interference is just avoided.
Find the maximum value of addendum radius of the pinion if the pinion has 25 teeth, the larger gear has 100 teeth and the pressure angle is equal to 20°. Take the value of module as 6 mm.
Find the maximum value of addendum radius of the larger gear if the pinion has 17 teeth, the larger gear has 51 teeth and the pressure angle is equal to 15°. Take the value of module as 8 mm.
Two 25° involute spur gears have a module of 7 mm. The addendum is equal to one module. If the larger gear has 60 teeth and the pinion has 30 teeth, they will interfere with each other. True or false?
Two 20° involute spur gears have a module of 12 mm. The addendum is equal to 1.5 module. If the larger gear has 40 teeth and the pinion has 20 teeth, find the pressure angle at which interference can be avoided.
The angle at which the teeth of the gear are inclined to the axis of a gear is called as __________
All Engineering MCQs