Match list I with list II
List I List II
A. Scott-Russel 1. Intemittent mechanism motion
B. Geneva 2. Quick return mechanism motion
C. Offset slider crank 3. Simple motion harmonic mechanism
D. Scotch Yoke 4. Straight line mechanism motion

Match list I with list II

Type of joint Motion constrained
A. Revolute 1. Three
B. Cylindrical 2. Five
C. Spherical 3. Four
4. Two
5. Zero

The number of binary links, number of binary joints and number of ternary joints in Peaucelliar mechanism is

The number of degree of freedom of a planer linkage with 8 links and 9 simple revolute joints is

The following list of statements is given:
1) Grashoff’s rule states that for a planar crank-rocker 4-bar mechanism, the sum of the shortest and longest link lengths cannot be less than the sum of the remaining two link lengths.
2) Inversions of a mechanism are created by fixing different links, one at a time.
3) Geneva mechanism is an intermittent motion device.
4) Grubler’s criterion assumes mobility of a planar mechanism to be one.

The number of correct statements in the above list is

A mechanism has 8 links, out of which 5 are binary, 2 are ternary and 1 is quaternary. The number of instantaneous centres of rotation will be

In a dynamically equivalent system, a uniformly distributed mass is divided into

A crank and slotted lever mechanism used in a shaper has a centre distance of 300 mm between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 120 mm. Find the ratio of the time of cutting to the time of return stroke.

The magnitude of velocities of the points on a rigid link is directly proportional to the distances from the points to the instantaneous centre.

The velocity of the instantaneous centre relative to any third rigid link will be different.

When the pin connects one sliding member and the other turning member, the angular velocity of the sliding member is __________