0
Mcqs

Engineering Metrology Mcqs

Our 1000+ Engineering Metrology MCQ (Multiple Choice Questions and Answers) focus on all areas of Engineering Metrology covering 100+ topics. These topics are chosen from a collection of the most authoritative and best reference books on Engineering Metrology. One should spend 1 hour daily practicing these MCQs for 2-3 months to learn and assimilate the Engineering Metrology subject comprehensively. This way of systematic learning will prepare anyone easily for Engineering Metrology exams, contests, online tests, quizzes, MCQ-tests, viva-voce, interviews, and certifications.

 

Engineering Metrology Multiple Choice Questions Highlights

  • 1000+ Multiple Choice Questions & Answers (MCQs) in Engineering Metrology with a detailed explanation of every question.
  • These MCQs cover theoretical concepts, true-false(T/F) statements, fill-in-the-blanks, and match the following style statements.
  • These MCQs also cover numerical as well as diagram-oriented MCQs.
  • These MCQs are organized chapterwise and each Chapter is further organized topicwise.
  • Every MCQ set focuses on a specific topic of a given Chapter in Engineering Metrology Subject.

 

Who should Practice Engineering Metrology MCQs?

  • Students who are preparing for college tests and exams such as mid-term tests and semester tests on Engineering Metrology.
  • Students who are preparing for Online/Offline Tests/Contests in Engineering Metrology.
  • Students who wish to sharpen their knowledge of Engineering Metrology Subject.
  • Anyone preparing for Aptitude test in Engineering Metrology.
  • Anyone preparing for interviews (campus/off-campus interviews, walk-in interviews, and company interviews).
  • Anyone preparing for entrance examinations and other competitive examinations.
  • All - Experienced, Freshers and College / School Students.
Latest Popular
Q:

What is the tool maker’s flat size which generally uses both the faces as a working surface?

A) 30 to 45 mm B) 50 to 75 mm
C) 75 to 100 mm D) 100 to 200 mm
 
Answer & Explanation Answer: B) 50 to 75 mm

Explanation: Both the faces are highly finished in the range of 50-75 mm size and both are used as working surface and above this range it has only one face finished as working surface.

View Answer Discuss

Category: Mechanical Engineering MCQs
Sub Category: Engineering Metrology Mcqs

80
Q:

Which of the following is not true about the requirements of material selection for tool maker’s flats?

A) Suitable surface for the wringing purpose B) High degree of rigidity
C) Wear resistance D) Absorb radiant heat
 
Answer & Explanation Answer: D) Absorb radiant heat

Explanation: Material should have a proper surface so that gauges can be wrung on to it and it should have a high degree of rigidity and freedom from warping. Material should reflect radiant heat.

View Answer Discuss

Category: Mechanical Engineering MCQs
Sub Category: Engineering Metrology Mcqs

82
Q:

Why are shallow grooves provided in larger flats?

A) To minimize the possibilities of uneven hardening B) For design purpose
C) To maintain high accuracy for a longer period D) To make them lighter
 
Answer & Explanation Answer: A) To minimize the possibilities of uneven hardening

Explanation: A shallow groove is provided around the periphery of larger flats to avoid uneven hardening and for easy handling.

View Answer Discuss

Category: Mechanical Engineering MCQs
Sub Category: Engineering Metrology Mcqs

71
Q:

Which of the following is not true about tool maker’s flats?

A) Tool maker’s flats should be free from inclusions B) Tool maker’s flats are of less hardness
C) Working surfaces are produced by lapping D) Should be located in a stirred atmosphere
 
Answer & Explanation Answer: B) Tool maker’s flats are of less hardness

Explanation: Tool maker’s flats should be free from inclusions which after proper heat treatment gives a high hardness. Working surfaces are finished by lapping to possess a high degree of accuracy and uniformity.

View Answer Discuss

Category: Mechanical Engineering MCQs
Sub Category: Engineering Metrology Mcqs

126
Q:

What is the shape of the tool maker’s flats?

A) Circular B) Rectangular
C) Square D) Triangular
 
Answer & Explanation Answer: A) Circular

Explanation: Tool maker’s flats are small circular surface plates which are used for the high precision measurement work.

View Answer Discuss

Category: Mechanical Engineering MCQs
Sub Category: Engineering Metrology Mcqs

117